Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/tty/serial/8250/8250_rsa.c rsa_autoconfig() -> __rsa_enable()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | up | 4096-ptr_max |
| PARAM_VALUE | 0 | up->bugs | 0-1 |
| PARAM_VALUE | 0 | up->capabilities | 0,256,264,1792,2304,3328,12544 |
| PARAM_VALUE | 0 | up->gpios | 0,4096-ptr_max |
| PARAM_VALUE | 0 | up->port.cons | 0,4096-ptr_max |
| PARAM_VALUE | 0 | up->port.serial_in | 4096-ptr_max |
| PARAM_VALUE | 0 | up->port.serial_out | 4096-ptr_max |
| PARAM_VALUE | 0 | up->port.type | 4 |
| DATA_SOURCE | 0 | up | $0 |
| FUZZY_MAX | 0 | up->bugs | 0 |
| FUZZY_MAX | 0 | up->capabilities | 0 |
| BIT_INFO | 0 | up->probe | 0x1,0xff |
| PREEMPT_ADD | |||
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| LOCK2 | &port->lock | ||
| LOCK2 | flags | ||
| HALF_LOCKED2 | _T->lock | ||
| TYPE_LOCK | (struct uart_port)->lock |
drivers/tty/serial/8250/8250_rsa.c rsa_enable() -> __rsa_enable()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | up | 4096-ptr_max |
| PARAM_VALUE | 0 | up->port.cons | 0,4096-ptr_max |
| PARAM_VALUE | 0 | up->port.lock.rlock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | up->port.type | 13 |
| PARAM_VALUE | 0 | up->port.uartclk | 0-14745599,14745601-u32max |
| DATA_SOURCE | 0 | up | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | _T->lock | ||
| LOCK2 | irq | ||
| LOCK2 | 0 | &up->port.lock | |
| HALF_LOCKED2 | &port->lock | ||
| TYPE_LOCK | (struct uart_port)->lock |