Open Menu /

Defined in 1 files as a prototype:

Defined in 1 files as a function:

Referenced in 2 files:

Smatch caller information:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c bnx2x_initial_phy_init() -> bnx2x_phy_init()

Type Parameter Key Value
PARAM_VALUE 0 params 4096-ptr_max
PARAM_VALUE 0 params->req_fc_auto_adv 256,768
PARAM_VALUE 1 vars 4096-ptr_max
LOCK2 &bp->port.phy_mutex
TYPE_LOCK (struct bnx2x_port)->phy_mutex

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c bnx2x_link_set() -> bnx2x_phy_init()

Type Parameter Key Value
PARAM_VALUE 0 params 4096-ptr_max
PARAM_VALUE 0 params->bp 4096-ptr_max
PARAM_VALUE 1 vars 4096-ptr_max
PARAM_VALUE 1 vars->link_status 0
PARAM_VALUE 1 vars->link_up 0
PARAM_VALUE 1 vars->phy_flags 0
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
USER_DATA 0 params->eee_mode 0,268435456-u32max[c][u]
LOCK2 &bp->port.phy_mutex
TYPE_LOCK (struct bnx2x_port)->phy_mutex

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c bnx2x_run_loopback() -> bnx2x_phy_init()

Type Parameter Key Value
PARAM_VALUE 0 params 4096-ptr_max
PARAM_VALUE 0 params->loopback_mode 2,6-7
PARAM_VALUE 1 vars 4096-ptr_max
NOCHECK_CALL
HOST_DATA 0 params->chip_id 0-u32max
HOST_DATA 0 params->eee_mode 0-u32max
HOST_DATA 0 params->feature_config_flags 0-u32max
HOST_DATA 0 params->hw_led_mode 0-u16max
HOST_DATA 0 params->lane_config 0-u32max
HOST_DATA 0 params->lfa_base 0-u32max
HOST_DATA 0 params->link_attr_sync 0-u32max
HOST_DATA 0 params->link_flags 0-u16max[c]
HOST_DATA 0 params->multi_phy_config 0-u32max
HOST_DATA 0 params->req_fc_auto_adv 0-u16max
HOST_DATA 0 params->rsrv 0-255
HOST_DATA 0 params->shmem2_base 0-u32max
HOST_DATA 0 params->shmem_base 0-u32max
HOST_DATA 0 params->switch_cfg 0-u32max
HOST_DATA 1 vars->aeu_int_mask 0-u32max
HOST_DATA 1 vars->check_kr2_recovery_cnt 0
HOST_DATA 1 vars->duplex 0-1
HOST_DATA 1 vars->eee_status 0-u32max
HOST_DATA 1 vars->fault_detected 0-255
HOST_DATA 1 vars->flow_ctrl 256,512,768,1024
HOST_DATA 1 vars->ieee_fc 0-u16max
HOST_DATA 1 vars->link_status 0-u32max
HOST_DATA 1 vars->link_up 0-1
HOST_DATA 1 vars->periodic_flags 0-u16max
HOST_DATA 1 vars->phy_flags 1,3,5,7,13,33,45
HOST_DATA 1 vars->phy_link_up 0-1
HOST_DATA 1 vars->rsrv2 0-u16max
HOST_DATA 1 vars->rx_tx_asic_rst 0-255
HOST_DATA 1 vars->turn_to_run_wc_rt 0-255
LOCK2 &bp->port.phy_mutex
TYPE_LOCK (struct bnx2x_port)->phy_mutex

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c bnx2x_set_eeprom() -> bnx2x_phy_init()

Type Parameter Key Value
PARAM_VALUE 0 params 4096-ptr_max
PARAM_VALUE 0 params->bp 4096-ptr_max
PARAM_VALUE 1 vars 4096-ptr_max
PARAM_VALUE 1 vars->link_status 0
PARAM_VALUE 1 vars->link_up 0
PARAM_VALUE 1 vars->phy_flags 0
LOCK2 &bp->port.phy_mutex
TYPE_LOCK (struct bnx2x_port)->phy_mutex