Open Menu /

Documented in 1 files:

Defined in 3 files as a function:

Referenced in 3 files:

Smatch caller information:

drivers/i2c/busses/i2c-nomadik.c i2c_irq_handler() -> clear_all_interrupts()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
DATA_SOURCE 0 priv $1
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HALF_LOCKED2 &desc->request_mutex
HALF_LOCKED2 flags

drivers/i2c/busses/i2c-nomadik.c init_hw() -> clear_all_interrupts()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
BUF_SIZE 0 priv s32min-(-1),1-s32max
BUF_SIZE 0 priv s32min-(-1),1-s32max
BUF_SIZE 0 priv->cli.buffer s32min-(-1),1-s32max
BUF_SIZE 0 priv->clk (-1),1-s32max
DATA_SOURCE 0 priv $0
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
UNITS 0 priv unit_byte

drivers/i2c/busses/i2c-nomadik.c nmk_i2c_remove() -> clear_all_interrupts()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
BUF_SIZE 0 priv s32min-(-2),1-s32max
BUF_SIZE 0 priv s32min-(-2),1-s32max
CAPPED_DATA 0 &priv->adap 1
NOCHECK_CALL
HOST_DATA 0 priv->adap.cad->state->u.pc s64min-s64max
HOST_DATA 0 priv->adap.cad->state->u.pc->ctr 0-4294967295
HOST_DATA 0 priv->adap.cad->state->u.pc->ecr 0-4294967295
UNITS 0 priv unit_byte

drivers/memory/emif.c disable_and_clear_all_interrupts() -> clear_all_interrupts()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
PARAM_VALUE 0 priv->plat_data 4096-ptr_max
BUF_SIZE 0 priv s32min-(-2),1-s32max
BUF_SIZE 0 priv s32min-(-2),1-s32max
BUF_SIZE 0 priv->dev (-1),1616
DATA_SOURCE 0 priv $0
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
UNITS 0 priv unit_byte
HALF_LOCKED2 &_dev->mutex

drivers/memory/emif.c setup_interrupts() -> clear_all_interrupts()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
PARAM_VALUE 0 priv->base 4096-ptr_max
PARAM_VALUE 0 priv->plat_data 4096-ptr_max
BUF_SIZE 0 priv 120
BUF_SIZE 0 priv->dev 1616
DATA_SOURCE 0 priv $0
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL

drivers/infiniband/hw/hfi1/chip.c set_up_interrupts() -> clear_all_interrupts()

Type Parameter Key Value
DATA_SOURCE 0 priv $0
NOCHECK_CALL