Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/net/phy/mxl-gpy.c gpy115_loopback() -> gpy_loopback()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->aneg_done | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mdi_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mii_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_get_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_tdr_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->config_inband | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->disable_autonomous_eee | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->flags | 0-2,4-5,8 |
| PARAM_VALUE | 0 | phydev->drv->get_features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_link_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_capability | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_snapshot | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_next_update_time | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_phy_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_rate_matching | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi_max | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sset_count | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_strings | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->handle_interrupt | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->inband_caps | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_blink_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_brightness_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_get | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_is_supported | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_polarity_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->link_change_notify | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->module_eeprom | 0 |
| PARAM_VALUE | 0 | phydev->drv->module_info | 0 |
| PARAM_VALUE | 0 | phydev->drv->phy_id_mask | 0,1048512,1048560,1048574,16777212,16777215,268435440,429496627,4294966272,4294967247,4294967272,4294967279-4294967280,4294967282,4294967289,4294967292,4294967294-u32max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_page | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->remove | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_loopback | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->soft_reset | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->update_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_page | 0,4096-ptr_max |
| PARAM_VALUE | 1 | enable | 1 |
| DATA_SOURCE | 0 | phydev | $0 |
| DATA_SOURCE | 1 | enable | $1 |
| DATA_SOURCE | 2 | speed | $2 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NO_OVERFLOW_SIMPLE | 0 | phydev->attached_dev->group | |
| HALF_LOCKED2 | 0 | &phydev->lock |
drivers/net/phy/mxl-gpy.c gpy115_loopback() -> gpy_loopback()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->aneg_done | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mdi_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mii_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_get_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_tdr_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->config_inband | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->disable_autonomous_eee | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->flags | 0-2,4-5,8 |
| PARAM_VALUE | 0 | phydev->drv->get_features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_link_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_capability | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_snapshot | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_next_update_time | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_phy_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_rate_matching | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi_max | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sset_count | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_strings | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->handle_interrupt | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->inband_caps | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_blink_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_brightness_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_get | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_is_supported | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_polarity_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->link_change_notify | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->module_eeprom | 0 |
| PARAM_VALUE | 0 | phydev->drv->module_info | 0 |
| PARAM_VALUE | 0 | phydev->drv->phy_id_mask | 0,1048512,1048560,1048574,16777212,16777215,268435440,429496627,4294966272,4294967247,4294967272,4294967279-4294967280,4294967282,4294967289,4294967292,4294967294-u32max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_page | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->remove | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_loopback | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->soft_reset | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->update_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_page | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->priv | 4096-ptr_max |
| PARAM_VALUE | 1 | enable | 0 |
| PARAM_VALUE | 2 | speed | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NO_OVERFLOW_SIMPLE | 0 | phydev->attached_dev->group | |
| HALF_LOCKED2 | 0 | &phydev->lock |
drivers/net/phy/xilinx_gmii2rgmii.c xgmiitorgmii_set_loopback() -> (struct phy_driver)->set_loopback()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->aneg_done | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mdi_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->attach_mii_port | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_get_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->cable_test_tdr_start | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->config_inband | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->disable_autonomous_eee | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->flags | 0-2,4-5,8 |
| PARAM_VALUE | 0 | phydev->drv->get_features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_link_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_capability | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_mse_snapshot | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_next_update_time | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_phy_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_plca_status | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_rate_matching | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi_max | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sset_count | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_strings | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->handle_interrupt | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->inband_caps | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_blink_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_brightness_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_get | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_control_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_hw_is_supported | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->led_polarity_set | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->link_change_notify | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->module_eeprom | 0 |
| PARAM_VALUE | 0 | phydev->drv->module_info | 0 |
| PARAM_VALUE | 0 | phydev->drv->phy_id_mask | 0,1048512,1048560,1048574,16777212,16777215,268435440,429496627,4294966272,4294967247,4294967272,4294967279-4294967280,4294967282,4294967289,4294967292,4294967294-u32max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_page | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->remove | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_loopback | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_plca_cfg | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->soft_reset | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->update_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_page | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->mdio.dev.driver_data | 4096-ptr_max |
| DATA_SOURCE | 0 | phydev | $0 |
| DATA_SOURCE | 1 | enable | $1 |
| DATA_SOURCE | 2 | speed | $2 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NO_OVERFLOW_SIMPLE | 0 | phydev->attached_dev->group | |
| HALF_LOCKED2 | 0 | &phydev->lock |
drivers/net/phy/phy.c phy_loopback() -> (struct phy_driver)->set_loopback()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->aneg_done | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->flags | 0-2,4-5,8 |
| PARAM_VALUE | 0 | phydev->drv->get_sqi | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi_max | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_strings | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->inband_caps | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->module_eeprom | 0 |
| PARAM_VALUE | 0 | phydev->drv->module_info | 0 |
| PARAM_VALUE | 0 | phydev->drv->phy_id_mask | 0,1048512,1048560,1048574,16777212,16777215,268435440,429496627,4294966272,4294967247,4294967272,4294967279-4294967280,4294967282,4294967289,4294967292,4294967294-u32max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->remove | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_loopback | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->soft_reset | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->lock.first_waiter | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->lock.first_waiter->list.prev->next | 5159360019465732096 |
| PARAM_VALUE | 0 | phydev->lock.first_waiter->task->blocked_on | 0 |
| PARAM_VALUE | 0 | phydev->lock.osq.tail.counter | 0-s32max |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.owner | (-1) |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.owner_cpu | u32max |
| PARAM_VALUE | 2 | speed | 0,100,1000 |
| CAPPED_DATA | 0 | &phydev->lock | 1 |
| CAPPED_DATA | 2 | speed | 1 |
| DATA_SOURCE | 0 | phydev | $0 |
| DATA_SOURCE | 1 | enable | $1 |
| DATA_SOURCE | 2 | speed | $2 |
| FUZZY_MAX | 2 | speed | 1000 |
| CONTAINER | 0 | -504-1688+0 | $(-1) |
| BIT_INFO | 2 | speed | 0x0,0x3ec |
| HARD_MAX | 2 | speed | 1000 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| LOCK2 | 0 | &phydev->lock | |
| TYPE_LOCK | (struct phy_device)->lock |
drivers/net/phy/phy.c phy_loopback() -> (struct phy_driver)->set_loopback()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->aneg_done | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->features | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->flags | 0-2,4-5,8 |
| PARAM_VALUE | 0 | phydev->drv->get_sqi | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_sqi_max | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_stats | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_strings | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->get_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->inband_caps | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->module_eeprom | 0 |
| PARAM_VALUE | 0 | phydev->drv->module_info | 0 |
| PARAM_VALUE | 0 | phydev->drv->phy_id_mask | 0,1048512,1048560,1048574,16777212,16777215,268435440,429496627,4294966272,4294967247,4294967272,4294967279-4294967280,4294967282,4294967289,4294967292,4294967294-u32max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->remove | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_loopback | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_tunable | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->set_wol | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->soft_reset | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->write_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->lock.first_waiter | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->lock.first_waiter->list.prev->next | 5159360019465732096 |
| PARAM_VALUE | 0 | phydev->lock.first_waiter->task->blocked_on | 0 |
| PARAM_VALUE | 0 | phydev->lock.osq.tail.counter | 0-s32max |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.owner | (-1) |
| PARAM_VALUE | 0 | phydev->lock.wait_lock.owner_cpu | u32max |
| PARAM_VALUE | 0 | phydev->loopback_enabled | 0 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.osq.tail.counter | 0-s32max |
| PARAM_VALUE | 1 | enable | 0 |
| PARAM_VALUE | 2 | speed | 0 |
| CAPPED_DATA | 0 | &phydev->lock | 1 |
| DATA_SOURCE | 0 | phydev | $0 |
| CONTAINER | 0 | -504-1688+0 | $(-1) |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | 0 | &phydev->lock | |
| TYPE_LOCK | (struct phy_device)->lock |