Open Menu /

Documented in 1 files:

Defined in 1 files as a function:

Referenced in 3 files:

Smatch caller information:

drivers/net/phy/phy_device.c phy_disconnect() -> phy_is_started()

Type Parameter Key Value
BUF_SIZE 0 phydev->adjust_link (-1),8
DATA_SOURCE 0 phydev $0
NOSPEC 0 phydev->attached_dev->ifindex
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->attached_dev->flags 0-526849[c]
USER_DATA 0 phydev->attached_dev->group s32min-s32max
USER_DATA 0 phydev->attached_dev->ifindex s32min-s32max
USER_DATA 0 phydev->attached_dev->mtu 0-s32max[c]
USER_DATA 0 phydev->attached_dev->num_tc 1-16[c]
USER_DATA 0 phydev->attached_dev->real_num_rx_queues 1-s32max[c]
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->num_napi_configs
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->num_rx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->proto_down
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->real_num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->stats.tx_bytes
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->tx_queue_len
UNITS 0 phydev unit_byte
HALF_LOCKED2 &_dev->mutex
HALF_LOCKED2 &adpt->reset_lock
HALF_LOCKED2 &dev->mutex
HALF_LOCKED2 global &hnae3_common_lock

drivers/net/phy/phy.c _phy_start_aneg() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
BUF_SIZE 0 phydev (-1),2592
BUF_SIZE 0 phydev (-1),2592
BUF_SIZE 0 phydev->adjust_link (-1),8
DATA_SOURCE 0 phydev $0
NOSPEC 0 phydev->speed
PREEMPT_ADD
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->autoneg 0
USER_DATA 0 phydev->duplex 0-255
USER_DATA 0 phydev->master_slave_set 0
USER_DATA 0 phydev->mdix_ctrl 0-255
USER_DATA 0 phydev->speed s32min-s32max
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->proto_down
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->real_num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->stats.tx_bytes
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->tx_queue_len
NO_OVERFLOW_SIMPLE 0 phydev->skb->extensions
UNITS 0 phydev unit_byte
LOCK2 0 &phydev->lock
TYPE_LOCK (struct phy_device)->lock

drivers/net/phy/phy.c _phy_state_machine() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
BUF_SIZE 0 phydev->adjust_link (-1),8
DATA_SOURCE 0 phydev $0
NOSPEC 0 phydev->attached_dev->ifindex
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->attached_dev->flags 0-526849[c]
USER_DATA 0 phydev->attached_dev->group s32min-s32max
USER_DATA 0 phydev->attached_dev->ifindex s32min-s32max
USER_DATA 0 phydev->attached_dev->mtu 0-s32max[c]
USER_DATA 0 phydev->attached_dev->num_tc 1-16[c]
USER_DATA 0 phydev->attached_dev->real_num_rx_queues 1-s32max[c]
USER_DATA 0 phydev->skb->data->nlmsg_flags 0-u16max[u]
USER_DATA 0 phydev->skb->data->nlmsg_len 0-4294967295[u]
USER_DATA 0 phydev->skb->data->nlmsg_pid 0-4294967295[u]
USER_DATA 0 phydev->skb->data->nlmsg_type 0-u16max[u]
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->proto_down
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->real_num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->stats.tx_bytes
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->tx_queue_len
NO_OVERFLOW_SIMPLE 0 phydev->skb->extensions
UNITS 0 phydev unit_byte
LOCK2 0 &phydev->lock
TYPE_LOCK (struct phy_device)->lock

drivers/net/phy/phy.c phy_ethtool_ksettings_set() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
CAPPED_DATA 0 phydev->mdio.addr 1
CAPPED_DATA 0 &phydev->lock 1
DATA_SOURCE 0 phydev $0
PREEMPT_ADD
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->autoneg 0
USER_DATA 0 phydev->duplex 0
USER_DATA 0 phydev->master_slave_set 0
USER_DATA 0 phydev->mdix_ctrl 0-255
UNITS 0 phydev unit_byte
LOCK2 0 &phydev->lock
HALF_LOCKED2 &bp->lock
HALF_LOCKED2 irq
TYPE_LOCK (struct phy_device)->lock

drivers/net/phy/phy.c phy_stop() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
BUF_SIZE 0 phydev->adjust_link (-1),8
DATA_SOURCE 0 phydev $0
NOSPEC 0 phydev->attached_dev->ifindex
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->attached_dev->flags 0-526849[c]
USER_DATA 0 phydev->attached_dev->group s32min-s32max
USER_DATA 0 phydev->attached_dev->ifindex s32min-s32max
USER_DATA 0 phydev->attached_dev->mtu 0-s32max[c]
USER_DATA 0 phydev->attached_dev->num_tc 1-16[c]
USER_DATA 0 phydev->attached_dev->real_num_rx_queues 1-s32max[c]
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->proto_down
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->real_num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->stats.tx_bytes
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->tx_queue_len
UNITS 0 phydev unit_byte
HALF_LOCKED2 &adpt->reset_lock
HALF_LOCKED2 &sfp->sm_mutex
HALF_LOCKED2 global &rtnl_mutex

drivers/net/phy/phy.c phy_stop_machine() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
BUF_SIZE 0 phydev->adjust_link (-1),8
CAPPED_DATA 0 &phydev->lock 1
DATA_SOURCE 0 phydev $0
NOSPEC 0 phydev->attached_dev->ifindex
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 phydev->attached_dev->flags 0-526849[c]
USER_DATA 0 phydev->attached_dev->group s32min-s32max
USER_DATA 0 phydev->attached_dev->ifindex s32min-s32max
USER_DATA 0 phydev->attached_dev->mtu 0-s32max[c]
USER_DATA 0 phydev->attached_dev->num_tc 1-16[c]
USER_DATA 0 phydev->attached_dev->real_num_rx_queues 1-s32max[c]
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->proto_down
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->real_num_tx_queues
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->stats.tx_bytes
NO_OVERFLOW_SIMPLE 0 phydev->attached_dev->tx_queue_len
NO_OVERFLOW_SIMPLE 0 phydev->skb->extensions
UNITS 0 phydev unit_byte
LOCK2 0 &phydev->lock
TYPE_LOCK (struct phy_device)->lock

drivers/net/ethernet/realtek/r8169_main.c phy_disable_eee_mode() -> phy_is_started()

Type Parameter Key Value
PARAM_VALUE 0 phydev 4096-ptr_max
DATA_SOURCE 0 phydev $0
RX_PATH
TASK_NOT_RUNNING
HALF_LOCKED2 &pool->lock