Open Menu /

Defined in 1 files as a prototype:

Defined in 1 files as a function:

Referenced in 4 files:

Smatch caller information:

drivers/tty/serial/ucc_uart.c qe_uart_set_termios() -> qe_setbrg()

Type Parameter Key Value
PARAM_VALUE 2 multiplier 16
CAPPED_DATA 1 rate 1
DATA_SOURCE 1 rate r uart_get_baud_rate
PREEMPT_ADD <- disables preempt
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA 1 rate 1-268435454,u32max[c]
USER_DATA 1 rate 1-s32max[c]
LOCK2 &port->lock
LOCK2 flags
HALF_LOCKED2 &port->mutex
HALF_LOCKED2 _T->lock
HALF_LOCKED2 global &console_mutex
TYPE_LOCK (struct uart_port)->lock

drivers/tty/serial/ucc_uart.c qe_uart_set_termios() -> qe_setbrg()

Type Parameter Key Value
PARAM_VALUE 2 multiplier 1
CAPPED_DATA 1 rate 1
DATA_SOURCE 1 rate r uart_get_baud_rate
PREEMPT_ADD <- disables preempt
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA 1 rate 1-268435454,u32max[c]
USER_DATA 1 rate 1-s32max[c]
LOCK2 &port->lock
LOCK2 flags
HALF_LOCKED2 &port->mutex
HALF_LOCKED2 _T->lock
HALF_LOCKED2 global &console_mutex
TYPE_LOCK (struct uart_port)->lock

drivers/tty/serial/ucc_uart.c qe_uart_set_termios() -> qe_setbrg()

Type Parameter Key Value
PARAM_VALUE 2 multiplier 16
CAPPED_DATA 1 rate 1
DATA_SOURCE 1 rate r uart_get_baud_rate
PREEMPT_ADD <- disables preempt
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA 1 rate 1-268435454,u32max[c]
USER_DATA 1 rate 1-s32max[c]
LOCK2 &port->lock
LOCK2 flags
HALF_LOCKED2 &port->mutex
HALF_LOCKED2 _T->lock
HALF_LOCKED2 global &console_mutex
TYPE_LOCK (struct uart_port)->lock

drivers/tty/serial/ucc_uart.c qe_uart_set_termios() -> qe_setbrg()

Type Parameter Key Value
PARAM_VALUE 2 multiplier 16
CAPPED_DATA 1 rate 1
DATA_SOURCE 1 rate r uart_get_baud_rate
PREEMPT_ADD <- disables preempt
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA 1 rate 1-268435454,u32max[c]
USER_DATA 1 rate 1-s32max[c]
LOCK2 &port->lock
LOCK2 flags
HALF_LOCKED2 &port->mutex
HALF_LOCKED2 _T->lock
HALF_LOCKED2 global &console_mutex
TYPE_LOCK (struct uart_port)->lock

drivers/net/wan/fsl_ucc_hdlc.c uhdlc_init() -> qe_setbrg()

Type Parameter Key Value
PARAM_VALUE 0 brg 0-40
PARAM_VALUE 1 rate 20000000
PARAM_VALUE 2 multiplier 1
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL