Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/tty/serial/sprd_serial.c sprd_complete_rx_dma() -> sprd_start_dma_rx()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | port | 4096-ptr_max |
| PARAM_VALUE | 0 | port->cons | 0,4096-ptr_max |
| BUF_SIZE | 0 | port | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | port | s32min-(-2),1-s32max |
| DATA_SOURCE | 0 | port | $0 |
| PREEMPT_ADD | <- disables preempt | ||
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| UNITS | 0 | port | unit_byte |
| LOCK2 | flags | ||
| LOCK2 | 0 | &port->lock | |
| HALF_LOCKED2 | &bdma_chan->lock | ||
| HALF_LOCKED2 | &ioat_chan->cleanup_lock | ||
| HALF_LOCKED2 | &mv_chan->lock | ||
| HALF_LOCKED2 | &pd_chan->lock | ||
| HALF_LOCKED2 | &plxdev->ring_lock | ||
| HALF_LOCKED2 | &swdma_chan->complete_lock | ||
| HALF_LOCKED2 | &td_chan->lock | ||
| HALF_LOCKED2 | bh | ||
| TYPE_LOCK | (struct uart_port)->lock |
drivers/tty/serial/sprd_serial.c sprd_uart_dma_startup() -> sprd_start_dma_rx()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | port | 4096-ptr_max |
| PARAM_VALUE | 0 | port->cons | 0,4096-ptr_max |
| PARAM_VALUE | 0 | port->dev | 4096-ptr_max |
| PARAM_VALUE | 0 | port->dev->dma_io_tlb_mem->for_alloc | 0-1 |
| PARAM_VALUE | 0 | port->dev->power.wakeirq->status | 0-4294967295 |
| PARAM_VALUE | 0 | port->lock.rlock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | port->ops->start_rx | 0,4096-ptr_max |
| BUF_SIZE | 0 | port | s32min-(-1),1-s32max |
| BUF_SIZE | 0 | port | s32min-(-1),1-s32max |
| CAPPED_DATA | 0 | port->cons | 1 |
| DATA_SOURCE | 0 | port | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| LOCK2 | _T->lock | ||
| HALF_LOCKED2 | 0 | &port->lock |