// SPDX-License-Identifier: GPL-2.0-only
/*
* Sony imx412 Camera Sensor Driver
*
* Copyright (C) 2021 Intel Corporation
*/
#include <linux/unaligned.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-cci.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* Streaming Mode */
#define IMX412_REG_MODE_SELECT CCI_REG8(0x0100)
#define IMX412_MODE_STANDBY 0x00
#define IMX412_MODE_STREAMING 0x01
/* Lines per frame */
#define IMX412_REG_LPFR CCI_REG16(0x0340)
/* Chip ID */
#define IMX412_REG_ID CCI_REG16(0x0016)
#define IMX412_ID 0x577
/* Exposure control */
#define IMX412_REG_EXPOSURE_CIT CCI_REG16(0x0202)
#define IMX412_EXPOSURE_MIN 8
#define IMX412_EXPOSURE_OFFSET 22
#define IMX412_EXPOSURE_STEP 1
#define IMX412_EXPOSURE_DEFAULT 0x0648
/* Analog gain control */
#define IMX412_REG_AGAIN CCI_REG16(0x0204)
#define IMX412_AGAIN_MIN 0
#define IMX412_AGAIN_MAX 978
#define IMX412_AGAIN_STEP 1
#define IMX412_AGAIN_DEFAULT 0
/* Group hold register */
#define IMX412_REG_HOLD CCI_REG8(0x0104)
/* Input clock rate */
#define IMX412_INCLK_RATE 24000000
/* CSI2 HW configuration */
#define IMX412_LINK_FREQ 600000000
#define IMX412_NUM_DATA_LANES 4
#define IMX412_REG_MIN 0x00
#define IMX412_REG_MAX 0xffff
/**
* struct imx412_reg_list - imx412 sensor register list
* @num_of_regs: Number of registers in the list
* @regs: Pointer to register list
*/
struct imx412_reg_list {
u32 num_of_regs;
const struct cci_reg_sequence *regs;
};
/**
* struct imx412_mode - imx412 sensor mode structure
* @width: Frame width
* @height: Frame height
* @code: Format code
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimum vertical blanking in lines
* @vblank_max: Maximum vertical blanking in lines
* @pclk: Sensor pixel clock
* @link_freq_idx: Link frequency index
* @reg_list: Register list for sensor mode
*/
struct imx412_mode {
u32 width;
u32 height;
u32 code;
u32 hblank;
u32 vblank;
u32 vblank_min;
u32 vblank_max;
u64 pclk;
u32 link_freq_idx;
struct imx412_reg_list reg_list;
};
static const char * const imx412_supply_names[] = {
"dovdd", /* Digital I/O power */
"avdd", /* Analog power */
"dvdd", /* Digital core power */
};
/**
* struct imx412 - imx412 sensor device structure
* @dev: Pointer to generic device
* @cci: CCI register map
* @client: Pointer to i2c client
* @sd: V4L2 sub-device
* @pad: Media pad. Only one pad supported
* @reset_gpio: Sensor reset gpio
* @inclk: Sensor input clock
* @supplies: Regulator supplies
* @ctrl_handler: V4L2 control handler
* @link_freq_ctrl: Pointer to link frequency control
* @pclk_ctrl: Pointer to pixel clock control
* @hblank_ctrl: Pointer to horizontal blanking control
* @vblank_ctrl: Pointer to vertical blanking control
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @vblank: Vertical blanking in lines
* @cur_mode: Pointer to current selected sensor mode
*/
struct imx412 {
struct device *dev;
struct regmap *cci;
struct i2c_client *client;
struct v4l2_subdev sd;
struct media_pad pad;
struct gpio_desc *reset_gpio;
struct clk *inclk;
struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *link_freq_ctrl;
struct v4l2_ctrl *pclk_ctrl;
struct v4l2_ctrl *hblank_ctrl;
struct v4l2_ctrl *vblank_ctrl;
struct {
struct v4l2_ctrl *exp_ctrl;
struct v4l2_ctrl *again_ctrl;
};
u32 vblank;
const struct imx412_mode *cur_mode;
};
static const s64 link_freq[] = {
IMX412_LINK_FREQ,
};
/* Sensor mode registers */
static const struct cci_reg_sequence mode_4056x3040_regs[] = {
{ CCI_REG8(0x0136), 0x18 },
{ CCI_REG8(0x0137), 0x00 },
{ CCI_REG8(0x3c7e), 0x08 },
{ CCI_REG8(0x3c7f), 0x02 },
{ CCI_REG8(0x38a8), 0x1f },
{ CCI_REG8(0x38a9), 0xff },
{ CCI_REG8(0x38aa), 0x1f },
{ CCI_REG8(0x38ab), 0xff },
{ CCI_REG8(0x55d4), 0x00 },
{ CCI_REG8(0x55d5), 0x00 },
{ CCI_REG8(0x55d6), 0x07 },
{ CCI_REG8(0x55d7), 0xff },
{ CCI_REG8(0x55e8), 0x07 },
{ CCI_REG8(0x55e9), 0xff },
{ CCI_REG8(0x55ea), 0x00 },
{ CCI_REG8(0x55eb), 0x00 },
{ CCI_REG8(0x575c), 0x07 },
{ CCI_REG8(0x575d), 0xff },
{ CCI_REG8(0x575e), 0x00 },
{ CCI_REG8(0x575f), 0x00 },
{ CCI_REG8(0x5764), 0x00 },
{ CCI_REG8(0x5765), 0x00 },
{ CCI_REG8(0x5766), 0x07 },
{ CCI_REG8(0x5767), 0xff },
{ CCI_REG8(0x5974), 0x04 },
{ CCI_REG8(0x5975), 0x01 },
{ CCI_REG8(0x5f10), 0x09 },
{ CCI_REG8(0x5f11), 0x92 },
{ CCI_REG8(0x5f12), 0x32 },
{ CCI_REG8(0x5f13), 0x72 },
{ CCI_REG8(0x5f14), 0x16 },
{ CCI_REG8(0x5f15), 0xba },
{ CCI_REG8(0x5f17), 0x13 },
{ CCI_REG8(0x5f18), 0x24 },
{ CCI_REG8(0x5f19), 0x60 },
{ CCI_REG8(0x5f1a), 0xe3 },
{ CCI_REG8(0x5f1b), 0xad },
{ CCI_REG8(0x5f1c), 0x74 },
{ CCI_REG8(0x5f2d), 0x25 },
{ CCI_REG8(0x5f5c), 0xd0 },
{ CCI_REG8(0x6a22), 0x00 },
{ CCI_REG8(0x6a23), 0x1d },
{ CCI_REG8(0x7ba8), 0x00 },
{ CCI_REG8(0x7ba9), 0x00 },
{ CCI_REG8(0x886b), 0x00 },
{ CCI_REG8(0x9002), 0x0a },
{ CCI_REG8(0x9004), 0x1a },
{ CCI_REG8(0x9214), 0x93 },
{ CCI_REG8(0x9215), 0x69 },
{ CCI_REG8(0x9216), 0x93 },
{ CCI_REG8(0x9217), 0x6b },
{ CCI_REG8(0x9218), 0x93 },
{ CCI_REG8(0x9219), 0x6d },
{ CCI_REG8(0x921a), 0x57 },
{ CCI_REG8(0x921b), 0x58 },
{ CCI_REG8(0x921c), 0x57 },
{ CCI_REG8(0x921d), 0x59 },
{ CCI_REG8(0x921e), 0x57 },
{ CCI_REG8(0x921f), 0x5a },
{ CCI_REG8(0x9220), 0x57 },
{ CCI_REG8(0x9221), 0x5b },
{ CCI_REG8(0x9222), 0x93 },
{ CCI_REG8(0x9223), 0x02 },
{ CCI_REG8(0x9224), 0x93 },
{ CCI_REG8(0x9225), 0x03 },
{ CCI_REG8(0x9226), 0x93 },
{ CCI_REG8(0x9227), 0x04 },
{ CCI_REG8(0x9228), 0x93 },
{ CCI_REG8(0x9229), 0x05 },
{ CCI_REG8(0x922a), 0x98 },
{ CCI_REG8(0x922b), 0x21 },
{ CCI_REG8(0x922c), 0xb2 },
{ CCI_REG8(0x922d), 0xdb },
{ CCI_REG8(0x922e), 0xb2 },
{ CCI_REG8(0x922f), 0xdc },
{ CCI_REG8(0x9230), 0xb2 },
{ CCI_REG8(0x9231), 0xdd },
{ CCI_REG8(0x9232), 0xe2 },
{ CCI_REG8(0x9233), 0xe1 },
{ CCI_REG8(0x9234), 0xb2 },
{ CCI_REG8(0x9235), 0xe2 },
{ CCI_REG8(0x9236), 0xb2 },
{ CCI_REG8(0x9237), 0xe3 },
{ CCI_REG8(0x9238), 0xb7 },
{ CCI_REG8(0x9239), 0xb9 },
{ CCI_REG8(0x923a), 0xb7 },
{ CCI_REG8(0x923b), 0xbb },
{ CCI_REG8(0x923c), 0xb7 },
{ CCI_REG8(0x923d), 0xbc },
{ CCI_REG8(0x923e), 0xb7 },
{ CCI_REG8(0x923f), 0xc5 },
{ CCI_REG8(0x9240), 0xb7 },
{ CCI_REG8(0x9241), 0xc7 },
{ CCI_REG8(0x9242), 0xb7 },
{ CCI_REG8(0x9243), 0xc9 },
{ CCI_REG8(0x9244), 0x98 },
{ CCI_REG8(0x9245), 0x56 },
{ CCI_REG8(0x9246), 0x98 },
{ CCI_REG8(0x9247), 0x55 },
{ CCI_REG8(0x9380), 0x00 },
{ CCI_REG8(0x9381), 0x62 },
{ CCI_REG8(0x9382), 0x00 },
{ CCI_REG8(0x9383), 0x56 },
{ CCI_REG8(0x9384), 0x00 },
{ CCI_REG8(0x9385), 0x52 },
{ CCI_REG8(0x9388), 0x00 },
{ CCI_REG8(0x9389), 0x55 },
{ CCI_REG8(0x938a), 0x00 },
{ CCI_REG8(0x938b), 0x55 },
{ CCI_REG8(0x938c), 0x00 },
{ CCI_REG8(0x938d), 0x41 },
{ CCI_REG8(0x5078), 0x01 },
{ CCI_REG8(0x0112), 0x0a },
{ CCI_REG8(0x0113), 0x0a },
{ CCI_REG8(0x0114), 0x03 },
{ CCI_REG8(0x0342), 0x11 },
{ CCI_REG8(0x0343), 0xa0 },
{ CCI_REG8(0x0340), 0x0d },
{ CCI_REG8(0x0341), 0xda },
{ CCI_REG8(0x3210), 0x00 },
{ CCI_REG8(0x0344), 0x00 },
{ CCI_REG8(0x0345), 0x00 },
{ CCI_REG8(0x0346), 0x00 },
{ CCI_REG8(0x0347), 0x00 },
{ CCI_REG8(0x0348), 0x0f },
{ CCI_REG8(0x0349), 0xd7 },
{ CCI_REG8(0x034a), 0x0b },
{ CCI_REG8(0x034b), 0xdf },
{ CCI_REG8(0x00e3), 0x00 },
{ CCI_REG8(0x00e4), 0x00 },
{ CCI_REG8(0x00e5), 0x01 },
{ CCI_REG8(0x00fc), 0x0a },
{ CCI_REG8(0x00fd), 0x0a },
{ CCI_REG8(0x00fe), 0x0a },
{ CCI_REG8(0x00ff), 0x0a },
{ CCI_REG8(0xe013), 0x00 },
{ CCI_REG8(0x0220), 0x00 },
{ CCI_REG8(0x0221), 0x11 },
{ CCI_REG8(0x0381), 0x01 },
{ CCI_REG8(0x0383), 0x01 },
{ CCI_REG8(0x0385), 0x01 },
{ CCI_REG8(0x0387), 0x01 },
{ CCI_REG8(0x0900), 0x00 },
{ CCI_REG8(0x0901), 0x11 },
{ CCI_REG8(0x0902), 0x00 },
{ CCI_REG8(0x3140), 0x02 },
{ CCI_REG8(0x3241), 0x11 },
{ CCI_REG8(0x3250), 0x03 },
{ CCI_REG8(0x3e10), 0x00 },
{ CCI_REG8(0x3e11), 0x00 },
{ CCI_REG8(0x3f0d), 0x00 },
{ CCI_REG8(0x3f42), 0x00 },
{ CCI_REG8(0x3f43), 0x00 },
{ CCI_REG8(0x0401), 0x00 },
{ CCI_REG8(0x0404), 0x00 },
{ CCI_REG8(0x0405), 0x10 },
{ CCI_REG8(0x0408), 0x00 },
{ CCI_REG8(0x0409), 0x00 },
{ CCI_REG8(0x040a), 0x00 },
{ CCI_REG8(0x040b), 0x00 },
{ CCI_REG8(0x040c), 0x0f },
{ CCI_REG8(0x040d), 0xd8 },
{ CCI_REG8(0x040e), 0x0b },
{ CCI_REG8(0x040f), 0xe0 },
{ CCI_REG8(0x034c), 0x0f },
{ CCI_REG8(0x034d), 0xd8 },
{ CCI_REG8(0x034e), 0x0b },
{ CCI_REG8(0x034f), 0xe0 },
{ CCI_REG8(0x0301), 0x05 },
{ CCI_REG8(0x0303), 0x02 },
{ CCI_REG8(0x0305), 0x04 },
{ CCI_REG8(0x0306), 0x00 },
{ CCI_REG8(0x0307), 0xc8 },
{ CCI_REG8(0x0309), 0x0a },
{ CCI_REG8(0x030b), 0x01 },
{ CCI_REG8(0x030d), 0x02 },
{ CCI_REG8(0x030e), 0x01 },
{ CCI_REG8(0x030f), 0x5e },
{ CCI_REG8(0x0310), 0x00 },
{ CCI_REG8(0x0820), 0x12 },
{ CCI_REG8(0x0821), 0xc0 },
{ CCI_REG8(0x0822), 0x00 },
{ CCI_REG8(0x0823), 0x00 },
{ CCI_REG8(0x3e20), 0x01 },
{ CCI_REG8(0x3e37), 0x00 },
{ CCI_REG8(0x3f50), 0x00 },
{ CCI_REG8(0x3f56), 0x00 },
{ CCI_REG8(0x3f57), 0xe2 },
{ CCI_REG8(0x3c0a), 0x5a },
{ CCI_REG8(0x3c0b), 0x55 },
{ CCI_REG8(0x3c0c), 0x28 },
{ CCI_REG8(0x3c0d), 0x07 },
{ CCI_REG8(0x3c0e), 0xff },
{ CCI_REG8(0x3c0f), 0x00 },
{ CCI_REG8(0x3c10), 0x00 },
{ CCI_REG8(0x3c11), 0x02 },
{ CCI_REG8(0x3c12), 0x00 },
{ CCI_REG8(0x3c13), 0x03 },
{ CCI_REG8(0x3c14), 0x00 },
{ CCI_REG8(0x3c15), 0x00 },
{ CCI_REG8(0x3c16), 0x0c },
{ CCI_REG8(0x3c17), 0x0c },
{ CCI_REG8(0x3c18), 0x0c },
{ CCI_REG8(0x3c19), 0x0a },
{ CCI_REG8(0x3c1a), 0x0a },
{ CCI_REG8(0x3c1b), 0x0a },
{ CCI_REG8(0x3c1c), 0x00 },
{ CCI_REG8(0x3c1d), 0x00 },
{ CCI_REG8(0x3c1e), 0x00 },
{ CCI_REG8(0x3c1f), 0x00 },
{ CCI_REG8(0x3c20), 0x00 },
{ CCI_REG8(0x3c21), 0x00 },
{ CCI_REG8(0x3c22), 0x3f },
{ CCI_REG8(0x3c23), 0x0a },
{ CCI_REG8(0x3e35), 0x01 },
{ CCI_REG8(0x3f4a), 0x03 },
{ CCI_REG8(0x3f4b), 0xbf },
{ CCI_REG8(0x3f26), 0x00 },
{ CCI_REG8(0x0202), 0x0d },
{ CCI_REG8(0x0203), 0xc4 },
{ CCI_REG8(0x0204), 0x00 },
{ CCI_REG8(0x0205), 0x00 },
{ CCI_REG8(0x020e), 0x01 },
{ CCI_REG8(0x020f), 0x00 },
{ CCI_REG8(0x0210), 0x01 },
{ CCI_REG8(0x0211), 0x00 },
{ CCI_REG8(0x0212), 0x01 },
{ CCI_REG8(0x0213), 0x00 },
{ CCI_REG8(0x0214), 0x01 },
{ CCI_REG8(0x0215), 0x00 },
{ CCI_REG8(0xbcf1), 0x00 },
};
/* Supported sensor mode configurations */
static const struct imx412_mode supported_mode = {
.width = 4056,
.height = 3040,
.hblank = 456,
.vblank = 506,
.vblank_min = 506,
.vblank_max = 32420,
.pclk = 480000000,
.link_freq_idx = 0,
.code = MEDIA_BUS_FMT_SRGGB10_1X10,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
.regs = mode_4056x3040_regs,
},
};
/**
* to_imx412() - imx412 V4L2 sub-device to imx412 device.
* @subdev: pointer to imx412 V4L2 sub-device
*
* Return: pointer to imx412 device
*/
static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct imx412, sd);
}
/**
* imx412_update_controls() - Update control ranges based on streaming mode
* @imx412: pointer to imx412 device
* @mode: pointer to imx412_mode sensor mode
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_update_controls(struct imx412 *imx412,
const struct imx412_mode *mode)
{
int ret;
ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx);
if (ret)
return ret;
ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank);
if (ret)
return ret;
return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min,
mode->vblank_max, 1, mode->vblank);
}
/**
* imx412_update_exp_gain() - Set updated exposure and gain
* @imx412: pointer to imx412 device
* @exposure: updated exposure value
* @gain: updated analog gain value
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
{
u32 lpfr;
int ret = 0;
int ret_hold;
lpfr = imx412->vblank + imx412->cur_mode->height;
dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u\n",
exposure, gain, lpfr);
cci_write(imx412->cci, IMX412_REG_HOLD, 1, &ret);
cci_write(imx412->cci, IMX412_REG_LPFR, lpfr, &ret);
cci_write(imx412->cci, IMX412_REG_EXPOSURE_CIT, exposure, &ret);
cci_write(imx412->cci, IMX412_REG_AGAIN, gain, &ret);
ret_hold = cci_write(imx412->cci, IMX412_REG_HOLD, 0, NULL);
if (ret_hold)
return ret_hold;
return ret;
}
static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx412 *imx412 =
container_of(ctrl->handler, struct imx412, ctrl_handler);
u32 analog_gain;
u32 exposure;
int ret;
switch (ctrl->id) {
case V4L2_CID_VBLANK:
imx412->vblank = imx412->vblank_ctrl->val;
dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u\n",
imx412->vblank,
imx412->vblank + imx412->cur_mode->height);
ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl,
IMX412_EXPOSURE_MIN,
imx412->vblank +
imx412->cur_mode->height -
IMX412_EXPOSURE_OFFSET,
1, IMX412_EXPOSURE_DEFAULT);
break;
case V4L2_CID_EXPOSURE:
/* Set controls only if sensor is in power on state */
if (!pm_runtime_get_if_in_use(imx412->dev))
return 0;
exposure = ctrl->val;
analog_gain = imx412->again_ctrl->val;
dev_dbg(imx412->dev, "Received exp %u, analog gain %u\n",
exposure, analog_gain);
ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
pm_runtime_put(imx412->dev);
break;
default:
dev_err(imx412->dev, "Invalid control %d\n", ctrl->id);
ret = -EINVAL;
}
return ret;
}
/* V4l2 subdevice control ops*/
static const struct v4l2_ctrl_ops imx412_ctrl_ops = {
.s_ctrl = imx412_set_ctrl,
};
static int imx412_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index > 0)
return -EINVAL;
code->code = supported_mode.code;
return 0;
}
static int imx412_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fsize)
{
if (fsize->index > 0)
return -EINVAL;
if (fsize->code != supported_mode.code)
return -EINVAL;
fsize->min_width = supported_mode.width;
fsize->max_width = fsize->min_width;
fsize->min_height = supported_mode.height;
fsize->max_height = fsize->min_height;
return 0;
}
/**
* imx412_fill_pad_format() - Fill subdevice pad format
* from selected sensor mode
* @imx412: pointer to imx412 device
* @mode: pointer to imx412_mode sensor mode
* @fmt: V4L2 sub-device format need to be filled
*/
static void imx412_fill_pad_format(struct imx412 *imx412,
const struct imx412_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
fmt->format.code = mode->code;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
}
static int imx412_get_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx412 *imx412 = to_imx412(sd);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
fmt->format = *framefmt;
} else {
imx412_fill_pad_format(imx412, imx412->cur_mode, fmt);
}
return 0;
}
static int imx412_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx412 *imx412 = to_imx412(sd);
const struct imx412_mode *mode;
int ret = 0;
mode = &supported_mode;
imx412_fill_pad_format(imx412, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
*framefmt = fmt->format;
} else {
ret = imx412_update_controls(imx412, mode);
if (!ret)
imx412->cur_mode = mode;
}
return ret;
}
static int imx412_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state)
{
struct imx412 *imx412 = to_imx412(sd);
struct v4l2_subdev_format fmt = { 0 };
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
imx412_fill_pad_format(imx412, &supported_mode, &fmt);
return imx412_set_pad_format(sd, sd_state, &fmt);
}
/**
* imx412_enable_streams() - Enable specified streams for the sensor
* @sd: pointer to the V4L2 subdevice
* @state: pointer to the subdevice state
* @pad: pad number for which streams are enabled
* @streams_mask: bitmask specifying the streams to enable
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_enable_streams(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state,
u32 pad, u64 streams_mask)
{
const struct imx412_reg_list *reg_list;
struct imx412 *imx412 = to_imx412(sd);
int ret;
ret = pm_runtime_resume_and_get(imx412->dev);
if (ret < 0)
return ret;
/* Write sensor mode registers */
reg_list = &imx412->cur_mode->reg_list;
ret = cci_multi_reg_write(imx412->cci, reg_list->regs,
reg_list->num_of_regs, NULL);
if (ret) {
dev_err(imx412->dev, "fail to write initial registers\n");
goto err_rpm_put;
}
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
if (ret) {
dev_err(imx412->dev, "fail to setup handler\n");
goto err_rpm_put;
}
/* Delay is required before streaming*/
usleep_range(7400, 8000);
/* Start streaming */
ret = cci_write(imx412->cci, IMX412_REG_MODE_SELECT,
IMX412_MODE_STREAMING, NULL);
if (ret) {
dev_err(imx412->dev, "fail to start streaming\n");
goto err_rpm_put;
}
return 0;
err_rpm_put:
pm_runtime_put(imx412->dev);
return ret;
}
/**
* imx412_disable_streams() - Enable specified streams for the sensor
* @sd: pointer to the V4L2 subdevice
* @state: pointer to the subdevice state
* @pad: pad number for which streams are disabled
* @streams_mask: bitmask specifying the streams to disable
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_disable_streams(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state,
u32 pad, u64 streams_mask)
{
struct imx412 *imx412 = to_imx412(sd);
int ret;
ret = cci_write(imx412->cci, IMX412_REG_MODE_SELECT,
IMX412_MODE_STANDBY, NULL);
if (ret)
dev_err(imx412->dev, "failed to set stream off\n");
pm_runtime_put(imx412->dev);
return 0;
}
/**
* imx412_detect() - Detect imx412 sensor
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, -EIO if sensor id does not match
*/
static int imx412_detect(struct imx412 *imx412)
{
int ret;
u64 val;
ret = cci_read(imx412->cci, IMX412_REG_ID, &val, NULL);
if (ret)
return dev_err_probe(imx412->dev, ret,
"failed to read chip id %x\n",
IMX412_ID);
if (val != IMX412_ID) {
return dev_err_probe(imx412->dev, -ENODEV,
"chip id mismatch: %x!=%llx",
IMX412_ID, val);
}
return 0;
}
/**
* imx412_parse_hw_config() - Parse HW configuration and check if supported
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_parse_hw_config(struct imx412 *imx412)
{
struct fwnode_handle *fwnode = dev_fwnode(imx412->dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
struct fwnode_handle *ep;
unsigned long rate;
unsigned int i;
int ret;
if (!fwnode)
return -ENXIO;
/* Request optional reset pin */
imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(imx412->reset_gpio)) {
dev_err(imx412->dev, "failed to get reset gpio %pe\n",
imx412->reset_gpio);
return PTR_ERR(imx412->reset_gpio);
}
/* Get sensor input clock */
imx412->inclk = devm_v4l2_sensor_clk_get(imx412->dev, NULL);
if (IS_ERR(imx412->inclk))
return dev_err_probe(imx412->dev, PTR_ERR(imx412->inclk),
"could not get inclk\n");
rate = clk_get_rate(imx412->inclk);
if (rate != IMX412_INCLK_RATE) {
dev_err(imx412->dev, "inclk frequency mismatch\n");
return -EINVAL;
}
/* Get optional DT defined regulators */
for (i = 0; i < ARRAY_SIZE(imx412_supply_names); i++)
imx412->supplies[i].supply = imx412_supply_names[i];
ret = devm_regulator_bulk_get(imx412->dev,
ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
if (ret)
return ret;
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
return ret;
if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
dev_err(imx412->dev,
"number of CSI2 data lanes %d is not supported\n",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto done_endpoint_free;
}
if (!bus_cfg.nr_of_link_frequencies) {
dev_err(imx412->dev, "no link frequencies defined\n");
ret = -EINVAL;
goto done_endpoint_free;
}
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ)
goto done_endpoint_free;
ret = -EINVAL;
done_endpoint_free:
v4l2_fwnode_endpoint_free(&bus_cfg);
return ret;
}
/* V4l2 subdevice ops */
static const struct v4l2_subdev_video_ops imx412_video_ops = {
.s_stream = v4l2_subdev_s_stream_helper,
};
static const struct v4l2_subdev_pad_ops imx412_pad_ops = {
.enum_mbus_code = imx412_enum_mbus_code,
.enum_frame_size = imx412_enum_frame_size,
.get_fmt = imx412_get_pad_format,
.set_fmt = imx412_set_pad_format,
.enable_streams = imx412_enable_streams,
.disable_streams = imx412_disable_streams,
};
static const struct v4l2_subdev_ops imx412_subdev_ops = {
.video = &imx412_video_ops,
.pad = &imx412_pad_ops,
};
static const struct v4l2_subdev_internal_ops imx412_internal_ops = {
.init_state = imx412_init_state,
};
static int imx412_power_on(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx412 *imx412 = to_imx412(sd);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
if (ret < 0) {
dev_err(dev, "failed to enable regulators\n");
return ret;
}
gpiod_set_value_cansleep(imx412->reset_gpio, 0);
ret = clk_prepare_enable(imx412->inclk);
if (ret) {
dev_err(imx412->dev, "fail to enable inclk\n");
goto error_reset;
}
/*
* Certain Arducam IMX577 module variants require a longer reset settle
* time. Increasing the delay from 1ms to 10ms ensures reliable startup.
*/
usleep_range(10000, 12000);
return 0;
error_reset:
gpiod_set_value_cansleep(imx412->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
return ret;
}
static int imx412_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx412 *imx412 = to_imx412(sd);
clk_disable_unprepare(imx412->inclk);
gpiod_set_value_cansleep(imx412->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
return 0;
}
/**
* imx412_init_controls() - Initialize sensor subdevice controls
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_init_controls(struct imx412 *imx412)
{
struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler;
const struct imx412_mode *mode = imx412->cur_mode;
u32 lpfr;
int ret;
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6);
if (ret)
return ret;
/* Initialize exposure and gain */
lpfr = mode->vblank + mode->height;
imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_EXPOSURE,
IMX412_EXPOSURE_MIN,
lpfr - IMX412_EXPOSURE_OFFSET,
IMX412_EXPOSURE_STEP,
IMX412_EXPOSURE_DEFAULT);
imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN,
IMX412_AGAIN_MIN,
IMX412_AGAIN_MAX,
IMX412_AGAIN_STEP,
IMX412_AGAIN_DEFAULT);
v4l2_ctrl_cluster(2, &imx412->exp_ctrl);
imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_VBLANK,
mode->vblank_min,
mode->vblank_max,
1, mode->vblank);
/* Read only controls */
imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_PIXEL_RATE,
mode->pclk, mode->pclk,
1, mode->pclk);
imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_LINK_FREQ,
ARRAY_SIZE(link_freq) -
1,
mode->link_freq_idx,
link_freq);
if (imx412->link_freq_ctrl)
imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_HBLANK,
IMX412_REG_MIN,
IMX412_REG_MAX,
1, mode->hblank);
if (imx412->hblank_ctrl)
imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
if (ctrl_hdlr->error) {
dev_err(imx412->dev, "control init failed: %d\n",
ctrl_hdlr->error);
v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
}
imx412->sd.ctrl_handler = ctrl_hdlr;
return 0;
}
static int imx412_probe(struct i2c_client *client)
{
struct imx412 *imx412;
const char *name;
int ret;
imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL);
if (!imx412)
return -ENOMEM;
imx412->dev = &client->dev;
name = device_get_match_data(&client->dev);
if (!name)
return -ENODEV;
imx412->cci = devm_cci_regmap_init_i2c(client, 16);
if (IS_ERR(imx412->cci))
return dev_err_probe(imx412->dev, PTR_ERR(imx412->cci),
"Failed to init CCI\n");
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops);
imx412->sd.internal_ops = &imx412_internal_ops;
ret = imx412_parse_hw_config(imx412);
if (ret) {
dev_err(imx412->dev, "HW configuration is not supported\n");
return ret;
}
ret = imx412_power_on(imx412->dev);
if (ret)
return dev_err_probe(imx412->dev, ret,
"failed to power-on the sensor\n");
/* Check module identity */
ret = imx412_detect(imx412);
if (ret) {
dev_err(imx412->dev, "failed to find sensor: %d\n", ret);
goto error_power_off;
}
/* Set default mode to max resolution */
imx412->cur_mode = &supported_mode;
imx412->vblank = imx412->cur_mode->vblank;
ret = imx412_init_controls(imx412);
if (ret) {
dev_err(imx412->dev, "failed to init controls: %d\n", ret);
goto error_power_off;
}
/* Initialize subdev */
imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
v4l2_i2c_subdev_set_name(&imx412->sd, client, name, NULL);
/* Initialize source pad */
imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
if (ret) {
dev_err(imx412->dev, "failed to init entity pads: %d\n", ret);
goto error_handler_free;
}
imx412->sd.state_lock = imx412->ctrl_handler.lock;
ret = v4l2_subdev_init_finalize(&imx412->sd);
if (ret < 0) {
dev_err_probe(imx412->dev, ret, "subdev init error\n");
goto error_media_entity;
}
pm_runtime_set_active(imx412->dev);
pm_runtime_enable(imx412->dev);
ret = v4l2_async_register_subdev_sensor(&imx412->sd);
if (ret < 0) {
dev_err_probe(imx412->dev, ret,
"failed to register sub-device\n");
goto error_subdev_cleanup;
}
pm_runtime_idle(imx412->dev);
return 0;
error_subdev_cleanup:
v4l2_subdev_cleanup(&imx412->sd);
pm_runtime_disable(imx412->dev);
pm_runtime_set_suspended(imx412->dev);
error_media_entity:
media_entity_cleanup(&imx412->sd.entity);
error_handler_free:
v4l2_ctrl_handler_free(imx412->sd.ctrl_handler);
error_power_off:
imx412_power_off(imx412->dev);
return ret;
}
static void imx412_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_async_unregister_subdev(sd);
v4l2_subdev_cleanup(sd);
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
if (!pm_runtime_status_suspended(&client->dev))
imx412_power_off(&client->dev);
pm_runtime_set_suspended(&client->dev);
}
static const struct dev_pm_ops imx412_pm_ops = {
SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL)
};
static const struct of_device_id imx412_of_match[] = {
{ .compatible = "sony,imx412", .data = "imx412" },
{ .compatible = "sony,imx577", .data = "imx577" },
{ }
};
MODULE_DEVICE_TABLE(of, imx412_of_match);
static struct i2c_driver imx412_driver = {
.probe = imx412_probe,
.remove = imx412_remove,
.driver = {
.name = "imx412",
.pm = &imx412_pm_ops,
.of_match_table = imx412_of_match,
},
};
module_i2c_driver(imx412_driver);
MODULE_DESCRIPTION("Sony imx412 sensor driver");
MODULE_LICENSE("GPL");
